Recently, Car Quality Network learned from relevant channels that Jeep has officially released the Avenger 4xe model.
The new car is equipped with an electric four-wheel drive system consisting of a fuel engine and dual motors.
It is expected to be launched in Europe later this year.
Previously released information shows that the pre-sale price of the pure electric version is 39,500 euros, equivalent to approximately 290,000 yuan.
In terms of appearance, the new car is basically the same as the pure electric version.
The seven-hole grille still adopts a closed design and is equipped with sharp headlight sets.
The lower enclosure has been redesigned, with the trapezoidal style and fog lamp positions moving upwards, which helps to lower the visual center of gravity and increase the sense of weight.
At the same time, new car engines can also be equipped with stickers to reduce sun refraction.
On the side of the body, the new car is replaced with a new style of black rims, the minimum ground clearance is increased to 210mm, and it has a 22-degree approach angle, a 21-degree passage angle, a 35-degree departure angle and a 400-mm wading depth.
The vehicle’s passability is improved.
Because of the addition of a fuel engine, the new car is also equipped with a single-sided and single-outlet exhaust, which is cleverly integrated into the rear bumper, so that the overall feeling is not destroyed.
In terms of interior, the new car adopts a floating central control screen, a full LCD meter, a flat-bottom steering wheel, and retains a large number of physical buttons to facilitate the driver to operate vehicle functions.
In addition, the new car seats have been replaced with new fabrics, which are more durable and easier to clean.
, In terms of power, the new car is equipped with a hybrid system consisting of a 1.
2T engine and dual motors.
The maximum horsepower of the engine is 136Ps, and the transmission system is matched with a 6-speed dual clutch gearbox.
The maximum horsepower of the two motors is 28Ps and the acceleration time of 0-100km/h is 9.5s. New cars will use all-wheel drive within 30km/h, and front-wheel drive will be used as much as possible within 30-90km/h to reduce fuel consumption.
At the same time, the rear axle of the new car is also equipped with a torque amplifier, which can release up to 1900N·m of torque and complete 40% climbing.
Regarding more news about new cars, Chequality Network will continue to pay attention and report.
, Return to the first electric network home page>,.
