Kuaidi Technology reported on July 18 that recently, the owner of a Zhiji L6 claimed that he had turned on intelligent assisted driving at high speed.
As a result, an accident occurred while crossing a curve, causing the vehicle to scratch against the guardrail.
Judging from the video released by the vehicle, the Pilot intelligent assisted driving system was turned on throughout the entire journey.
At first, the vehicle was very stable, and it slowed down smoothly when crossing corners.
However, when it was about to pass through the knot road, it suddenly began to accelerate violently and eventually collided with the guardrail.
The woman said: Currently, the car is still in the maintenance center to assess the damage (the car insurance is complete and there is no need to be refreshed).
The relevant person in charge of Zhiji also found out that after analyzing the accident data at that time, Zhiji has a good after-sales attitude and performed his duties.
This is still gratifying.
We are not sure where the main problem in this accident lies.
It may be improper operation or it may be a loophole in smart driving.
At the same time, she also said: Before the incident, I used it according to my understanding of the LCC.
After the incident, my boyfriend used the ideal l9MAX to reopen the accident section.
The ideal LCC can pass through, but it is not completely comparable without simulating the accident scene.
I have also suggested that the Zhiji official improve the tutorial on smart driving, in order to allow more smart car owners and newbies to use it more safely and safely.
, in response to this matter, Zhiji Automobile responded: Recently, the official noticed that Zhiji L6 users had an accident of scratching against the guardrail while turning on the Pilot function.
Xiaobian wanted to provide functional descriptions and vehicle reminders for smart driving.
, Currently, there are three functions: ACC full-speed domain adaptive cruise, Pilot full-speed domain driving assistance (LCC lane keeping), and NOA pilot assistance.
, In the video, the vehicle only has the Pilot function turned on.
The Pilot function adds lateral control to the ACC function to keep the vehicle centered in the current lane.
After the target speed is set in Pilot mode, there is no vehicle blocking it in front, and the vehicle will continue to speed up.
To achieve the set speed.
It is recommended that you use the NOA navigation assist function on highways.
Based on the Pilot function, it integrates navigation or high-precision map information, and will provide effective road information supplements to assist vehicle driving control.
Finally, his appeal: Please don’t mistake Pilot for NOA.
It is related to life safety, so remember!, 
,[End of this article] If you want to reprint it, please indicate the source: Kuaidi Technology, Editor in charge: Luomu, Report the content of the article, return to the home page of First Electric Network>,.
